--
 -- Copyright(C) 2019-2024 Western Telematic, Inc.
 --
 WTI-CONSOLE-MIB DEFINITIONS ::= BEGIN
 IMPORTS
 MODULE-IDENTITY, NOTIFICATION-TYPE,
 OBJECT-TYPE, enterprises FROM SNMPv2-SMI
 DisplayString FROM SNMPv2-TC;
 westernTelematic OBJECT IDENTIFIER ::= { enterprises 2634 }
 console MODULE-IDENTITY
  LAST-UPDATED "202407081600Z" -- 08 Jul 2024
  ORGANIZATION "Western Telematic, Inc."
  CONTACT-INFO
  "Western Telematic, Inc.
  5 Sterling
  Irvine, Ca 92618
  Email: support@wti.com"
  DESCRIPTION
   "This is the MIB module for console products"
  REVISION "202407081600Z" -- 08 Jul 2024
  DESCRIPTION
   "V8.06 for console products "
 ::= { westernTelematic 1 }
 --
 -- System Tables
 --
 systemTables OBJECT IDENTIFIER ::= { console 100 }
 --
 -- Port Table
 --
 portTable OBJECT-TYPE
  SYNTAX SEQUENCE OF PortEntry
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
   "A table of ports."
 ::= { systemTables 100 }
 portEntry OBJECT-TYPE
  SYNTAX PortEntry
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
   "Row definition for the port table."
  INDEX {portIndex}
 ::= { portTable 1 }
 PortEntry ::= SEQUENCE {
  portIndex INTEGER,
  portID DisplayString,
  portName DisplayString,
  portBufferThreshold INTEGER,
  portUserName DisplayString,
  portStatus DisplayString,
  portBufferCt INTEGER
 }
 portIndex OBJECT-TYPE
  SYNTAX INTEGER (0..41)
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
   "Index for the port table."
 ::= { portEntry 1 }
 portID OBJECT-TYPE
  SYNTAX DisplayString(SIZE(6..7))
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "The ID of the port."
 ::= { portEntry 2 }
 portName OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "The name of the port."
 ::= { portEntry 3 }
 portBufferThreshold OBJECT-TYPE
  SYNTAX INTEGER (1..262144)
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "Port buffer threshold"
 ::= { portEntry 4 }
 portUserName OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "The name of the user logged in to port"
 ::= { portEntry 5 }
 portStatus OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
   "The status of the port."
 ::= { portEntry 6 }
 portBufferCt OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "Port byte threshold"
 ::= { portEntry 7 }
 --
 -- Plug Table
 --
 plugTable OBJECT-TYPE
  SYNTAX SEQUENCE OF PlugEntry
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
   "A table of plugs."
 ::= { systemTables 200 }
 plugEntry OBJECT-TYPE
  SYNTAX PlugEntry
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
   "Row definition for the plug table."
  INDEX { plugIndex }
 ::= { plugTable 1 }
 PlugEntry ::= SEQUENCE {
  plugIndex INTEGER,
  plugID DisplayString,
  plugStatus INTEGER,
  plugAction INTEGER,
  plugName DisplayString,
  plugCurrent INTEGER,
  plugPower INTEGER
 }
 plugIndex OBJECT-TYPE
  SYNTAX INTEGER (0..80)
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
   "Index for the plug table."
 ::= { plugEntry 1 }
 plugID OBJECT-TYPE
  SYNTAX DisplayString(SIZE(9..11))
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "The ID of the plug."
 ::= { plugEntry 2 }
 plugStatus OBJECT-TYPE
  SYNTAX INTEGER (0..1)
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "Plug status"
 ::= { plugEntry 3 }
 plugAction OBJECT-TYPE
  SYNTAX INTEGER (0..8)
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
   "Plug action"
 ::= { plugEntry 4 }
 plugName OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "The Name of the plug."
 ::= { plugEntry 5 }
 plugCurrent OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "Plug current (In tenths of amps, divide by 10 for value in amps)"
 ::= { plugEntry 7 }
 plugPower OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "Plug power (Watts)"
 ::= { plugEntry 8 }
 --
 -- Plug Group Table
 --
 plugGroupTable OBJECT-TYPE
  SYNTAX SEQUENCE OF PlugGroupEntry
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
   "A table of plug groups."
 ::= { systemTables 300 }
 plugGroupEntry OBJECT-TYPE
  SYNTAX PlugGroupEntry
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
   "Row definition for the plug group table."
  INDEX { plugGroupIndex }
 ::= { plugGroupTable 1 }
 PlugGroupEntry ::= SEQUENCE {
  plugGroupIndex INTEGER,
  plugGroupName DisplayString,
  plugGroupAction INTEGER,
  plugGroupCurrent INTEGER,
  plugGroupPower INTEGER
 }
 plugGroupIndex OBJECT-TYPE
  SYNTAX INTEGER (0..54)
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
   "Index for the plug group table."
 ::= { plugGroupEntry 1 }
 plugGroupName OBJECT-TYPE
  SYNTAX DisplayString(SIZE(1..24))
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "The name of the plug group."
 ::= { plugGroupEntry 2 }
 plugGroupAction OBJECT-TYPE
  SYNTAX INTEGER (0..8)
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
   "Plug group action"
 ::= { plugGroupEntry 3 }
 plugGroupCurrent OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "Plug group current (In tenths of amps, divide by 10 for value in amps)"
 ::= { plugGroupEntry 4 }
 plugGroupPower OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "Plug group power (Watts)"
 ::= { plugGroupEntry 5 }
 --
 -- User Table
 --
 userTable OBJECT-TYPE
  SYNTAX SEQUENCE OF UserEntry
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
   "A table of users."
 ::= { systemTables 400 }
 userEntry OBJECT-TYPE
  SYNTAX UserEntry
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
   "Row definition for the user table."
  INDEX { userIndex }
 ::= { userTable 1 }
 UserEntry ::= SEQUENCE {
  userIndex INTEGER,
  userName DisplayString,
  userPasswd DisplayString,
  userAccessLevel INTEGER,
  userPortAccess DisplayString,
  userPlugAccess DisplayString,
  userGroupAccess DisplayString,
  userSerialAccess INTEGER,
  userTelnetSshAccess INTEGER,
  userWebAccess INTEGER,
  userOutboundTelAccess INTEGER,
  userCurrentPowerMetering INTEGER,
  userCallbackNum1 DisplayString,
  userCallbackNum2 DisplayString,
  userCallbackNum3 DisplayString,
  userCallbackNum4 DisplayString,
  userCallbackNum5 DisplayString,
  userSubmit INTEGER
 }
 userIndex OBJECT-TYPE
  SYNTAX INTEGER (0..128)
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
   "Index for the user table."
 ::= { userEntry 1 }
 userName OBJECT-TYPE
  SYNTAX DisplayString(SIZE(0..32))
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
   "The name of the user."
 ::= { userEntry 2 }
 userPasswd OBJECT-TYPE
  SYNTAX DisplayString(SIZE(1..16))
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
   "The password of the user."
 ::= { userEntry 3 }
 userAccessLevel OBJECT-TYPE
  SYNTAX INTEGER (0..3)
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
   "Users access level"
 ::= { userEntry 4 }
 userPortAccess OBJECT-TYPE
  SYNTAX DisplayString(SIZE(1..41))
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
   "Access to ports."
 ::= { userEntry 5 }
 userPlugAccess OBJECT-TYPE
  SYNTAX DisplayString(SIZE(1..20))
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
   "Access to plugs."
 ::= { userEntry 6 }
 userGroupAccess OBJECT-TYPE
  SYNTAX DisplayString(SIZE(1..54))
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
   "Access to plug groups."
 ::= { userEntry 10 }
 userSerialAccess OBJECT-TYPE
  SYNTAX INTEGER (0..1)
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
   "Access to serial interface."
 ::= { userEntry 11 }
 userTelnetSshAccess OBJECT-TYPE
  SYNTAX INTEGER (0..1)
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
   "Access to Telnet/SSH interface."
 ::= { userEntry 12 }
 userWebAccess OBJECT-TYPE
  SYNTAX INTEGER (0..1)
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
   "Access to web interface."
 ::= { userEntry 13 }
 userOutboundTelAccess OBJECT-TYPE
  SYNTAX INTEGER (0..1)
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
   "Access to outbound telnet."
 ::= { userEntry 14 }
 userCurrentPowerMetering OBJECT-TYPE
  SYNTAX INTEGER (0..1)
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
   "Access to Current/Power Metering."
 ::= { userEntry 15 }
 userCallbackNum1 OBJECT-TYPE
  SYNTAX DisplayString(SIZE(0..32))
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
   "Callback number1."
 ::= { userEntry 16 }
 userCallbackNum2 OBJECT-TYPE
  SYNTAX DisplayString(SIZE(0..32))
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
   "Callback number2."
 ::= { userEntry 17 }
 userCallbackNum3 OBJECT-TYPE
  SYNTAX DisplayString(SIZE(0..32))
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
   "Callback number3."
 ::= { userEntry 18 }
 userCallbackNum4 OBJECT-TYPE
  SYNTAX DisplayString(SIZE(0..32))
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
   "Callback number4."
 ::= { userEntry 19 }
 userCallbackNum5 OBJECT-TYPE
  SYNTAX DisplayString(SIZE(0..32))
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
   "Callback number5."
 ::= { userEntry 20 }
 userSubmit OBJECT-TYPE
  SYNTAX INTEGER (0..1)
  MAX-ACCESS read-write
  STATUS current
  DESCRIPTION
   "Submit changes to user."
 ::= { userEntry 31 }
 --
 -- Environment Tables
 --
 environmentTables OBJECT IDENTIFIER ::= { console 200 }
 environmentUnitTable OBJECT-TYPE
  SYNTAX SEQUENCE OF EnvironmentUnitEntry
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
   "A table of environment status for units."
 ::= { environmentTables 10 }
 environmentUnitEntry OBJECT-TYPE
  SYNTAX EnvironmentUnitEntry
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
   "Row definition for the environment unit table."
  INDEX { environmentUnitIndex }
 ::= { environmentUnitTable 1 }
 EnvironmentUnitEntry ::= SEQUENCE {
  environmentUnitIndex INTEGER,
  environmentUnitName DisplayString,
  environmentUnitTemperature INTEGER,
  environmentUnitCurrentA INTEGER,
  environmentUnitVoltageA INTEGER,
  environmentUnitPowerA INTEGER,
  environmentUnitCurrentB INTEGER,
  environmentUnitVoltageB INTEGER,
  environmentUnitPowerB INTEGER,
  environmentUnitCurrentC INTEGER,
  environmentUnitVoltageC INTEGER,
  environmentUnitPowerC INTEGER,
  environmentUnitCurrentD INTEGER,
  environmentUnitVoltageD INTEGER,
  environmentUnitPowerD INTEGER,
  environmentSysRAM INTEGER,
  environmentSysFlash INTEGER,
  environmentMacEth0 DisplayString,
  environmentMacEth1 DisplayString,
  environmentInputPower1 INTEGER,
  environmentInputPower2 INTEGER,
  environmentInputPower3 INTEGER,
  environmentInputPower4 INTEGER,
  environmentModemPhoneNumber DisplayString,
  environmentSerialNumber DisplayString,
  environmentSoftwareVersion DisplayString,
  environmentAssetTag DisplayString,
  environmentSiteId DisplayString
 }
 environmentUnitIndex OBJECT-TYPE
  SYNTAX INTEGER (0..3)
  MAX-ACCESS not-accessible
  STATUS current
  DESCRIPTION
   "Index for the environment unit table."
 ::= { environmentUnitEntry 1 }
 environmentUnitName OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "The name of the unit."
 ::= { environmentUnitEntry 2 }
 environmentUnitTemperature OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "The temperature of the unit."
 ::= { environmentUnitEntry 3 }
 environmentUnitCurrentA OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "The number of amps in branch A for unit (In tenths of amps, divide by 10 for value in amps)."
 ::= { environmentUnitEntry 4 }
 environmentUnitVoltageA OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "The voltage of branch A for unit."
 ::= { environmentUnitEntry 5 }
 environmentUnitPowerA OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "The number of watts used by branch A for unit."
 ::= { environmentUnitEntry 6 }
 environmentUnitCurrentB OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "The number of amps in branch B for unit (In tenths of amps, divide by 10 for value in amps)."
 ::= { environmentUnitEntry 7 }
 environmentUnitVoltageB OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "The voltage of branch B for unit."
 ::= { environmentUnitEntry 8 }
 environmentUnitPowerB OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "The number of watts used by branch b for unit."
 ::= { environmentUnitEntry 9 }
 environmentUnitCurrentC OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "The number of amps in branch C for unit (In tenths of amps, divide by 10 for value in amps)."
 ::= { environmentUnitEntry 10 }
 environmentUnitVoltageC OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "The voltage of branch C for unit."
 ::= { environmentUnitEntry 11 }
 environmentUnitPowerC OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "The number of watts used by branch c for unit."
 ::= { environmentUnitEntry 12 }
 environmentUnitCurrentD OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "The number of amps in branch D for unit (In tenths of amps, divide by 10 for value in amps)."
 ::= { environmentUnitEntry 13 }
 environmentUnitVoltageD OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "The voltage of branch D for unit."
 ::= { environmentUnitEntry 14 }
 environmentUnitPowerD OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "The number of watts used by branch d for unit."
 ::= { environmentUnitEntry 15 }
 environmentSysRAM OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "Total system RAM."
 ::= { environmentUnitEntry 18 }
 environmentSysFlash OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "Total system Flash."
 ::= { environmentUnitEntry 19 }
 environmentMacEth0 OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "MAC Address Eth0"
 ::= { environmentUnitEntry 20 }
 environmentMacEth1 OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "MAC Address Eth1"
 ::= { environmentUnitEntry 21 }
 environmentInputPower1 OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "Status of first power input."
 ::= { environmentUnitEntry 22 }
 environmentInputPower2 OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "Status of second power input."
 ::= { environmentUnitEntry 23 }
 environmentInputPower3 OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "Status of third power input."
 ::= { environmentUnitEntry 24 }
 environmentInputPower4 OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "Status of fourth power input."
 ::= { environmentUnitEntry 25 }
 environmentModemPhoneNumber OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "Unit modem phone number"
 ::= { environmentUnitEntry 26 }
 environmentSerialNumber OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "Unit serial number"
 ::= { environmentUnitEntry 27 }
 environmentSoftwareVersion OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "Unit software version"
 ::= { environmentUnitEntry 28 }
 environmentAssetTag OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "Unit asset tag"
 ::= { environmentUnitEntry 29 }
 environmentSiteId OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "Unit site ID"
 ::= { environmentUnitEntry 30 }
 environmentSystemTotalCurrent OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "Total current for system  (In tenths of amps, divide by 10 for value in amps)."
 ::= { environmentTables 60 }
 environmentSystemTotalPower OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "Total power on system."
 ::= { environmentTables 70 }
 environmentMonthlyPowerLog OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "The monthly power usage log"
 ::= { environmentTables 80 }
 --
 -- Alarm Tables
 --
 alarmTables OBJECT IDENTIFIER ::= { console 280 }
 alarmOverCurrentInitial OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "State of the Over Current Initial Alarm (0 = Inactive, 1 = Active)"
 ::= { alarmTables 1 }
 alarmOverCurrentCritical OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "State of the Over Current Critical Alarm (0 = Inactive, 1 = Active)"
 ::= { alarmTables 2 }
 alarmOverTemperatureInitial OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "State of the Over Temperature Initial Alarm (0 = Inactive, 1 = Active)"
 ::= { alarmTables 3 }
 alarmOverTemperatureCritical OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "State of the Over Temperature Critical Alarm (0 = Inactive, 1 = Active)"
 ::= { alarmTables 4 }
 alarmCircuitBreakerOpen OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "State of the Circuit Breaker Open Alarm (0 = Inactive, 1 = Active)"
 ::= { alarmTables 5 }
 alarmCommLoss OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "State of the Communication Loss Alarm (0 = Inactive, 1 = Active)"
 ::= { alarmTables 6 }
 alarmLostVoltage OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "State of the Lost Voltage (Line Input) Alarm (0 = Inactive, 1 = Active)"
 ::= { alarmTables 7 }
 alarmPingNoAnswer OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "State of the Ping No Answer Alarm (0 = Inactive, 1 = Active)"
 ::= { alarmTables 8 }
 alarmInvalidAccessLockout OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "State of the Invalid Access Lockout Alarm (0 = Inactive, 1 = Active)"
 ::= { alarmTables 9 }
 alarmPowerCycle OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "State of the Power Cycle Alarm (0 = Inactive, 1 = Active)"
 ::= { alarmTables 10 }
 alarmBufferThreshold OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "State of the Buffer Threshold Alarm (0 = Inactive, 1 = Active)"
 ::= { alarmTables 11 }
 alarmPlugCurrent OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "State of the Plug Current Alarm (0 = Inactive, 1 = Active)"
 ::= { alarmTables 13 }
 alarmLostOptoVoltage OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "State of the Lost Voltage (Line Input) Alarm (0 = Inactive, 1 = Active)"
 ::= { alarmTables 14 }
 alarmEmergencyShutoff OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "State of the Emergency Shutoff Alarm (0 = Inactive, 1 = Active)"
 ::= { alarmTables 15 }
 alarmNoDialtone OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "State of the No Dialtone Alarm (0 = Inactive, 1 = Active)"
 ::= { alarmTables 16 }
 alarmWakeupOnFailureCell OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "State of the Wakeup On Failure Cell Alarm (0 = Inactive, 1 = Active)"
 ::= { alarmTables 17 }
 alarmIpPassthroughDataUsage OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "State of the IP Passthrough Data Usage Alarm (0 = Inactive, 1 = Active)"
 ::= { alarmTables 18 }
 alarmBufferFiltering OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "State of the Buffer Filtering Alarm (0 = Inactive, 1 = Active)"
 ::= { alarmTables 19 }
 alarmNoCellularPppConnection OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "State of the No Cellular PPP Connection Alarm (0 = Inactive, 1 = Active)"
 ::= { alarmTables 20 }
 alarmWakeupOnFailureEth0 OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "State of the Wakeup On Failure Eth0 Alarm (0 = Inactive, 1 = Active)"
 ::= { alarmTables 21 }
 alarmWakeupOnFailureEth1 OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "State of the Wakeup On Failure Eth1 Alarm (0 = Inactive, 1 = Active)"
 ::= { alarmTables 22 }
 alarmUserLogin OBJECT-TYPE
  SYNTAX INTEGER
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "State of the Cell User Login Alarm (0 = Inactive, 1 = Active)"
 ::= { alarmTables 23 }
 --
 -- Traps
 --
 wtiTraps OBJECT IDENTIFIER ::= { console 300 }
 -- Trap Info
 trapInfo OBJECT-TYPE
  SYNTAX DisplayString
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
   "Alarm information"
 ::= { wtiTraps 1 }
 -- Test Traps
 testTraps OBJECT IDENTIFIER ::= { wtiTraps 2}
 testTrap TRAP-TYPE
  ENTERPRISE testTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "A test trap"
 ::= 1
 -- Alarm Traps
 bufferThresholdTraps OBJECT IDENTIFIER ::= { wtiTraps 3}
 bufferThresholdCrossedSetTrap TRAP-TYPE
  ENTERPRISE bufferThresholdTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Buffer Threshold Crossed Alarm"
 ::= 1
 bufferThresholdCrossedClearTrap TRAP-TYPE
  ENTERPRISE bufferThresholdTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Buffer Threshold Crossed Alarm (Clear)"
 ::= 2
 overCurrentInitialTraps OBJECT IDENTIFIER ::= { wtiTraps 4}
 overCurrentInitialSetTrap TRAP-TYPE
  ENTERPRISE overCurrentInitialTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Over Current Initial Alarm"
 ::= 1
 overCurrentInitialClearTrap TRAP-TYPE
  ENTERPRISE overCurrentInitialTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Over Current Initial Alarm (Clear)"
 ::= 2
 overCurrentCriticalTraps OBJECT IDENTIFIER ::= { wtiTraps 5}
 overCurrentCriticalSetTrap TRAP-TYPE
  ENTERPRISE overCurrentCriticalTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Over Current Critical Alarm"
 ::= 1
 overCurrentCriticalClearTrap TRAP-TYPE
  ENTERPRISE overCurrentCriticalTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Over Current Critical Alarm (Clear)"
 ::= 2
 overTemperatureInitialTraps OBJECT IDENTIFIER ::= { wtiTraps 6}
 overTemperatureInitialSetTrap TRAP-TYPE
  ENTERPRISE overTemperatureInitialTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Over Temperature Initial Alarm"
 ::= 1
 overTemperatureInitialClearTrap TRAP-TYPE
  ENTERPRISE overTemperatureInitialTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Over Temperature Initial Alarm (Clear)"
 ::= 2
 overTemperatureCriticalTraps OBJECT IDENTIFIER ::= { wtiTraps 7}
 overTemperatureCriticalSetTrap TRAP-TYPE
  ENTERPRISE overTemperatureCriticalTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Over Temperature Critical Alarm"
 ::= 1
 overTemperatureCriticalClearTrap TRAP-TYPE
  ENTERPRISE overTemperatureCriticalTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Over Temperature Critical Alarm (Clear)"
 ::= 2
 circuitBreakerOpenTraps OBJECT IDENTIFIER ::= { wtiTraps 8}
 circuitBreakerOpenSetTrap TRAP-TYPE
  ENTERPRISE circuitBreakerOpenTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Circuit Breaker Open Alarm"
 ::= 1
 circuitBreakerOpenClearTrap TRAP-TYPE
  ENTERPRISE circuitBreakerOpenTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Circuit Breaker Open Alarm (Clear)"
 ::= 2
 lostCommTraps OBJECT IDENTIFIER ::= { wtiTraps 9}
 lostCommSetTrap TRAP-TYPE
  ENTERPRISE lostCommTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Lost Communication with AUX Unit"
 ::= 1
 lostCommClearTrap TRAP-TYPE
  ENTERPRISE lostCommTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Lost Communication with AUX Unit (Clear)"
 ::= 2
 lostVoltageTraps OBJECT IDENTIFIER ::= { wtiTraps 10}
 lostVoltageSetTrap TRAP-TYPE
  ENTERPRISE lostVoltageTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Lost Voltage (Line In)"
 ::= 1
 lostVoltageClearTrap TRAP-TYPE
  ENTERPRISE lostVoltageTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Lost Voltage (Line In) (Clear)"
 ::= 2
 pingNoAnswerTraps OBJECT IDENTIFIER ::= { wtiTraps 11}
 pingNoAnswerSetTrap TRAP-TYPE
  ENTERPRISE pingNoAnswerTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Ping No Answer"
 ::= 1
 pingNoAnswerClearTrap TRAP-TYPE
  ENTERPRISE pingNoAnswerTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Ping No Answer (Clear)"
 ::= 2
 lockoutTraps OBJECT IDENTIFIER ::= { wtiTraps 12}
 lockoutSetTrap TRAP-TYPE
  ENTERPRISE lockoutTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Invalid Access Lockout"
 ::= 1
 lockoutClearTrap TRAP-TYPE
  ENTERPRISE lockoutTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Invalid Access Lockout (Clear)"
 ::= 2
 powercycleTraps OBJECT IDENTIFIER ::= { wtiTraps 13}
 powercycleSetTrap TRAP-TYPE
  ENTERPRISE powercycleTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Power Cycle"
 ::= 1
 plugCurrentTraps OBJECT IDENTIFIER ::= { wtiTraps 15}
 plugCurrentSetTrap TRAP-TYPE
  ENTERPRISE plugCurrentTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Plug Current"
 ::= 1
 plugCurrentClearTrap TRAP-TYPE
  ENTERPRISE plugCurrentTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Plug Current (Clear)"
 ::= 2
 lostOptoVoltageTraps OBJECT IDENTIFIER ::= { wtiTraps 16}
 lostOptoVoltageSetTrap TRAP-TYPE
  ENTERPRISE lostOptoVoltageTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Lost Voltage"
 ::= 1
 lostOptoVoltageClearTrap TRAP-TYPE
  ENTERPRISE lostOptoVoltageTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Lost Voltage (Clear)"
 ::= 2
 emergencyShutoffTraps OBJECT IDENTIFIER ::= { wtiTraps 17}
 emergencyShutoffSetTrap TRAP-TYPE
  ENTERPRISE emergencyShutoffTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Emergency Shutoff"
 ::= 1
 emergencyShutoffClearTrap TRAP-TYPE
  ENTERPRISE emergencyShutoffTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Emergency Shutoff (Clear)"
 ::= 2
 noDialtoneTraps OBJECT IDENTIFIER ::= { wtiTraps 18}
 noDialtoneSetTrap TRAP-TYPE
  ENTERPRISE noDialtoneTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "No Dialtone"
 ::= 1
 noDialtoneClearTrap TRAP-TYPE
  ENTERPRISE noDialtoneTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "No Dialtone (Clear)"
 ::= 2
 wakeupOnFailureCellTraps OBJECT IDENTIFIER ::= { wtiTraps 19}
 wakeupOnFailureCellSetTrap TRAP-TYPE
  ENTERPRISE wakeupOnFailureCellTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Wakeup On Failure Cell"
 ::= 1
 wakeupOnFailureCellClearTrap TRAP-TYPE
  ENTERPRISE wakeupOnFailureCellTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Wakeup On Failure Cell (Clear)"
 ::= 2
 ipPassthroughDataUsageTraps OBJECT IDENTIFIER ::= { wtiTraps 20}
 ipPassthroughDataUsageSetTrap TRAP-TYPE
  ENTERPRISE ipPassthroughDataUsageTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "IP Passthrough Data Usage"
 ::= 1
 ipPassthroughDataUsageClearTrap TRAP-TYPE
  ENTERPRISE ipPassthroughDataUsageTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "IP Passthrough Data Usage (Clear)"
 ::= 2
 bufferFilteringTraps OBJECT IDENTIFIER ::= { wtiTraps 21}
 bufferFilteringSetTrap TRAP-TYPE
  ENTERPRISE bufferFilteringTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Buffer Filtering"
 ::= 1
 bufferFilteringClearTrap TRAP-TYPE
  ENTERPRISE bufferFilteringTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Buffer Filtering (Clear)"
 ::= 2
 noCellularPppConnectionTraps OBJECT IDENTIFIER ::= { wtiTraps 22}
 noCellularPppConnectionSetTrap TRAP-TYPE
  ENTERPRISE noCellularPppConnectionTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "No Cellular PPP Connection"
 ::= 1
 noCellularPppConnectionClearTrap TRAP-TYPE
  ENTERPRISE noCellularPppConnectionTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "No Cellular PPP Connection (Clear)"
 ::= 2
 wakeupOnFailureEth0Traps OBJECT IDENTIFIER ::= { wtiTraps 23}
 wakeupOnFailureEth0SetTrap TRAP-TYPE
  ENTERPRISE wakeupOnFailureEth0Traps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Wakeup On Failure Eth0"
 ::= 1
 wakeupOnFailureEth0ClearTrap TRAP-TYPE
  ENTERPRISE wakeupOnFailureEth0Traps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Wakeup On Failure Eth0 (Clear)"
 ::= 2
 wakeupOnFailureEth1Traps OBJECT IDENTIFIER ::= { wtiTraps 24}
 wakeupOnFailureEth1SetTrap TRAP-TYPE
  ENTERPRISE wakeupOnFailureEth1Traps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Wakeup On Failure Eth1"
 ::= 1
 wakeupOnFailureEth1ClearTrap TRAP-TYPE
  ENTERPRISE wakeupOnFailureEth1Traps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Wakeup On Failure Eth1 (Clear)"
 ::= 2
 userLoginTraps OBJECT IDENTIFIER ::= { wtiTraps 25}
 userLoginLoginTrap TRAP-TYPE
  ENTERPRISE userLoginTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Cell User Login"
 ::= 1
 userLoginLogoutTrap TRAP-TYPE
  ENTERPRISE userLoginTraps
  VARIABLES {
  trapInfo
  }
  DESCRIPTION
   "Cell User Logout"
 ::= 2
 END